Unsupported browser. Please use a web browser with WebHID support (e.g. Chrome).
Please connect a DualShock 4, a DualSense or DualSense Edge controller to your computer and press Connect.
Connected to:
Finetune stick calibration
This screen allows to finetune raw calibration data on your controller
Welcome to the Calibration GUI
Just few things to know before you can start:
- This website is not affiliated with Sony, PlayStation & co.
- This service is provided without warranty. Use at your own risk.
- This website uses analytics to improve the service.
- Keep the internal battery of the controller connected and ensure it is well charged. If the battery dies during operations, the controller will be damaged and rendered unusable.
- Before doing the permanent calibration, try the temporary one to ensure that everything is working well.
Stick center calibration
Welcome to the stick center-calibration wizard!
This tool will guide you in re-centering the analog sticks of your controller. It consists in four steps: you will be asked to move both sticks in a direction and release them.
Please be aware that, once the calibration is running, it cannot be canceled. Do not close this page or disconnect your controller until is completed.
Press Start to begin calibration.
Please move both sticks to the top-left corner and release them.
When the sticks are back in the center, press Continue.
Please move both sticks to the top-right corner and release them.
When the sticks are back in the center, press Continue.
Please move both sticks to the bottom-left corner and release them.
When the sticks are back in the center, press Continue.
Please move both sticks to the bottom-right corner and release them.
When the sticks are back in the center, press Continue.
Calibration completed successfully!
You can check the calibration with the gamepad tester.
Have a nice day :)
Controller Info
Software
Hardware
Calibrating center
Recentering the controller sticks.
Please do not close this window and do not disconnect your controller.
Range calibration
The controller is now sampling data!
Rotate the sticks slowly to cover the whole range. Press "Done" when completed.
Storing calibration...
Calibration is being stored in the stick modules.
Please do not close this window and do not disconnect your controller.